Philips CDI 210/60 PAL/NTSC switch - CD-i in General https://www.theworldofcdi.com/community/cd-i-in-general/philips-cdi-210-60-pal-ntsc-switch/ The World of CD-i Discussion Board en-GB Sun, 19 Jul 2026 21:34:34 +0000 wpForo 60 RE: Philips CDI 210/60 PAL/NTSC switch https://www.theworldofcdi.com/community/cd-i-in-general/philips-cdi-210-60-pal-ntsc-switch/#post-884 Sun, 21 Feb 2021 23:06:24 +0000 @datapro, do you still have this player and could post a picture of the system ROM?]]> CD-i in General rosewood https://www.theworldofcdi.com/community/cd-i-in-general/philips-cdi-210-60-pal-ntsc-switch/#post-884 RE: Philips CDI 210/60 PAL/NTSC switch https://www.theworldofcdi.com/community/cd-i-in-general/philips-cdi-210-60-pal-ntsc-switch/#post-761 Sat, 20 Jun 2020 14:59:30 +0000 https://retrostuff.org/2020/01/12/modifications-for-philips-cd-i-players/#Mono-IV If you share a screenshot/the terminal output of the low-level test menu, I can tell you if a 32 KB NVRAM modification is possible or not. Look here for instructions: https://retrostuff.org/2020/04/03/back-up-and-restore-nvram-data-with-cd-i-link/]]> CD-i in General rosewood https://www.theworldofcdi.com/community/cd-i-in-general/philips-cdi-210-60-pal-ntsc-switch/#post-761 RE: Philips CDI 210/60 PAL/NTSC switch https://www.theworldofcdi.com/community/cd-i-in-general/philips-cdi-210-60-pal-ntsc-switch/#post-760 Thu, 18 Jun 2020 21:43:45 +0000 CD-i in General omegalfa https://www.theworldofcdi.com/community/cd-i-in-general/philips-cdi-210-60-pal-ntsc-switch/#post-760 RE: Philips CDI 210/60 PAL/NTSC switch https://www.theworldofcdi.com/community/cd-i-in-general/philips-cdi-210-60-pal-ntsc-switch/#post-759 Thu, 18 Jun 2020 18:12:09 +0000 CD-i in General DataPro https://www.theworldofcdi.com/community/cd-i-in-general/philips-cdi-210-60-pal-ntsc-switch/#post-759 RE: Philips CDI 210/60 PAL/NTSC switch https://www.theworldofcdi.com/community/cd-i-in-general/philips-cdi-210-60-pal-ntsc-switch/#post-552 Mon, 14 Oct 2019 20:48:01 +0000 CD-i in General rosewood https://www.theworldofcdi.com/community/cd-i-in-general/philips-cdi-210-60-pal-ntsc-switch/#post-552 RE: Philips CDI 210/60 PAL/NTSC switch https://www.theworldofcdi.com/community/cd-i-in-general/philips-cdi-210-60-pal-ntsc-switch/#post-549 Mon, 14 Oct 2019 08:43:05 +0000 CD-i in General omegalfa https://www.theworldofcdi.com/community/cd-i-in-general/philips-cdi-210-60-pal-ntsc-switch/#post-549 RE: Philips CDI 210/60 PAL/NTSC switch https://www.theworldofcdi.com/community/cd-i-in-general/philips-cdi-210-60-pal-ntsc-switch/#post-547 Thu, 10 Oct 2019 22:11:15 +0000 CD-i in General rosewood https://www.theworldofcdi.com/community/cd-i-in-general/philips-cdi-210-60-pal-ntsc-switch/#post-547 RE: Philips CDI 210/60 PAL/NTSC switch https://www.theworldofcdi.com/community/cd-i-in-general/philips-cdi-210-60-pal-ntsc-switch/#post-537 Wed, 09 Oct 2019 22:13:29 +0000 CD-i in General omegalfa https://www.theworldofcdi.com/community/cd-i-in-general/philips-cdi-210-60-pal-ntsc-switch/#post-537 RE: Philips CDI 210/60 PAL/NTSC switch https://www.theworldofcdi.com/community/cd-i-in-general/philips-cdi-210-60-pal-ntsc-switch/#post-536 Wed, 09 Oct 2019 22:09:00 +0000
Quote from omegalfa on 09/10/2019, 21:56
@rosewood, just to be sure (for my own knowledge), is it a SMD resistor or a SMD inductor? Most of the jumpers are resistors, at least on the Mono boards. Mini MMC = regular solder bridge to switch between 50/60 Hz Mono I and II = 1 kΩ Mono III and IV = 10 kΩ But as I said before, I haven't tried it with a Mono IV yet.]]> CD-i in General rosewood https://www.theworldofcdi.com/community/cd-i-in-general/philips-cdi-210-60-pal-ntsc-switch/#post-536 RE: Philips CDI 210/60 PAL/NTSC switch https://www.theworldofcdi.com/community/cd-i-in-general/philips-cdi-210-60-pal-ntsc-switch/#post-535 Wed, 09 Oct 2019 21:56:58 +0000 CD-i in General omegalfa https://www.theworldofcdi.com/community/cd-i-in-general/philips-cdi-210-60-pal-ntsc-switch/#post-535