Forum
Notifications
Clear all
Topic starter
I bought my Philips CD-i 220 with several softwares, movies and a gamepad.
Unfortunately, the gamepad is out of order.
I check the cable and I find that two wires are cut somewhere.
There is only 4 wires for 8 pins and the connected pins are 7,8,5 & 2
The wire are Brown, Black, Red & Orange
Could some tell me the wire connect to each pin ?
Thanks
Posted : 06/10/2019 9:42 am
I am pretty sure this Touchpad have wires broken right near the entry of it. It is most due to the way people use to wrap the cord.
I will try to post this weekend a repair of the Gamepad, it is mostly the same wires connections, including pictures.
Posted : 06/10/2019 7:43 pm
Topic starter
by the way, do you know where I could find a CD-i controller connector ?
https://www.aliexpress.com/item/32980584289.html?mp=1
I am not sure about the classic 8 pin mini-DIN compatibility.
Posted : 07/10/2019 3:28 pm
The ones from your link aren't the good ones.
You need this one:
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F300959846373
I have moved your topics to this section. Hardware Repair.
Posted : 07/10/2019 4:40 pm
Touchpad connector pins are (from top):
- GND - 5
- RXD - 2
- RTS - 7
- +5V - 8
Posted : 08/10/2019 12:04 am
Topic starter
Thanks rosewood
Posted : 09/10/2019 6:30 pm