Forum
Hi guys,
I would like to use my CD-i 470 as a CD-player in a "high end" audio setup. But it only has analog audio ouput. I would like to add an SP/Dif or optical output to it. Of course it want it to be a genuine digital output, so I am not looking for a converter of the analog audio.
Does someone know how this can be done?
R
Look into the CDI220/80 service manual. The players have the same mainboard generation (MonoIV), there are even comments about CDI470 in some of the schematics.
Then, look for the digital audio output (D.O. / BU10) and compare that area to your CDI470. Populate missing components, if needed, and hope that it works.
Thanks for the tip! I guess I found something in the scheme. Looks like a transformer is used. It reads "5300 Sagami". Of course I dived into Google but no luck (yet).
Also, it looks like the circuitry if fed by DOBM! and DOBM_KILL! I'm not sure how to read this. Where can I find these points in the circuit diagram?
I can't see the file that you've uploaded.
Here's a picture of that area in a CDI660, DO is the black port. With the component numbers you should be able to identify the area in the service manuals.
I can't see the file that I've uploaded either. Is there something wrong with that feature?
@rosewood, you mean the pictures?
I am seeing them from both of you.
You are still unable to see them? If you aren't I will ask @djkoelkast to see if there is a problem.
I can not see them. I guess it is an authorization problem; opening the image in a new tab results in a 403 error.
Quote from RetroMan on 01/08/2019, 17:10I can not see them. I guess it is an authorization problem; opening the image in a new tab results in a 403 error.
The images are corrupt, if I upload another image it works. When I download the image from the server and reupload it it does not.
I downloaded the files from the server, resaved them in ImageGlass and here's the result:
I can open my local copy without any problem, and I did nothing special to upload it. I just hit the upload button and pointed to the file....
Quote from RetroMan on 31/07/2019, 22:12Also, it looks like the circuitry if fed by DOBM! and DOBM_KILL! I'm not sure how to read this. Where can I find these points in the circuit diagram?
Two pages further is the layout of the measuring pads. The points are 105 and 114 on the lower left.
I've been looking in the parts list for item 5300, which I think should be a transformer from the brand "Sagami". However, I can't find it in the parts list. Am I overlooking something?
Quote from RetroMan on 04/08/2019, 22:08I've been looking in the parts list for item 5300, which I think should be a transformer from the brand "Sagami". However, I can't find it in the parts list. Am I overlooking something?
I can't find it either. It is also weird, that this section is marked as CDI740 only. It's probably best to wait until complete service manuals for CDI660/740 surface. Both my CDI220 and CDI660 have it built-in as well and if I ever open them up again then I can take close-up pictures for you.
