Forum
Hi guys,
There are 2 methods of repairing a CD-i player that doesn't store savegames and forgets the time.
- Replace the TimeKeeper chip. Although this being the "chique" way because everything is kept original, there are also disadvantages. TimeKeeper chips are not produced any more; chances of getting one that contains a decharged battery are getting bigger every day. Not to mention the forgeries from China that don't work at all. Another disadvantage is that desoldering the old chip might be a bit of a hassle. Either way, your newly placed TimeKeeper will be empty again someday.... Tip: When possible, place a chip socket!
- Hack into the TimeKeeper. Big disadvantage is that this is kind of a harsh job, you are litterally hacking into the chip. On the plus side, you don't need to desolder the original chip and you can easily replace the new backup battery when it runs empty. There are a lot of incomplete and/or unclear instructions on the internet, but I found one that is very good. Here it is: https://www.youtube.com/watch?v=cNwtHQ95PoE&feature=youtu.be&t=1551
Good luck, let me know if you succeeded!
R
All my players get a new socket and chip, as long as there are working TimeKeeper (or Dallas RTC) chips around. Yes, it's a hassle to desolder the old chips, especially when they are soldered from from both sides, but the result is worth it. And in the end, you can still put a hacked chip into the socket, if there is really no other option left.
Hmmm, didn't think of that option #3: Desolder the chip, put a socket in and put the hacked chip back. Do you know if they are soldered on both sides in a 470? I guess they do?
R
I guess you'll have to open it up and have a look. The chips are not always soldered from both sides and sometimes only a couple of pins are stuck. In any case you will need a powerful desoldering gun to remove all the solder from the bottom. Then inspect the top side and see what pins are still stuck. Either apply fresh solder and use desoldering wick to remove all of it or hold a soldering iron on the pins to heat them up one by one while using the gun from the other side.
